2017 Prinoth Panther T12 - Stock #6384D

$0.00

The Prinoth Panther T12 is an extremely versatile rubber tracked crawler carrier with a truck inspired chassis. With very low ground pressure, loaded and unloaded, these machines are designed to go nearly anywhere without much effort. Their 34-inch-wide chassis allows them to be outfitted with a number of different implements, making them an ideal platform for many applications. This track truck is equipped with a Vanguard CPW 125-4 welding rig and a HC-12 crane. For more information about purchasing or renting this machine, do not hesitate to contact Multi Machine Inc.

Hours: 1920

Serial #: 935300072

The Prinoth Panther T12 is an extremely versatile rubber tracked crawler carrier with a truck inspired chassis. With very low ground pressure, loaded and unloaded, these machines are designed to go nearly anywhere without much effort. Their 34-inch-wide chassis allows them to be outfitted with a number of different implements, making them an ideal platform for many applications. This track truck is equipped with a Vanguard CPW 125-4 welding rig and a HC-12 crane. For more information about purchasing or renting this machine, do not hesitate to contact Multi Machine Inc.

Hours: 1920

Serial #: 935300072

  • Weight: 27,500 lbs.

    Capacity: 25,000 lbs.

    Ground Pressure (Empty): 2.94 psi

    Ground Pressure (Loaded): 5.91 psi

    Engine: Caterpillar C7.1 ACERT

    Horsepower @ 2,200 RPM: 250 HP

    Torque @ 1,400 RPM: 895.4 lb-ft

    Max Speed: 6.2 mph

    Fuel Tank Capacity: 65 gallons

    Length: 31’5”

    Width: 10’5”

    Height: 12’3”

    Ground Clearance: 21”

    Uphill/Downhill Gradeability: 60%

    Side Hill Gradeability: 40%

  • Generator Module

    Design: 170 hp 6 cylinder engine equipped with 24 volt starting system, idle control, ether starting aid, block heater, pan heater, heavy duty radiator, primary and secondary fuel filters, and a 156 kVA generator.

    Rating: 156 kVA @ 60 Hz, 125 kVA @ 50 Hz

    Control Distribution Module

    Design: Control Box Nema 3 with Nema 4 enhancements mounted on isolators with 2 lockable doors CSA/UL/CE Approved.

    Rating: 200 AMP

    Air Compressor Module

    Design: Gardner-Denver/Champion with four opposing cylinders, pressure lubricated for off-level operations, vibration mounted. The compressor is equipped with an aftercooler that removes up to 65% of the moisture from the compressed air.

    Duty Cycle:
    70% at 250 psi (17.2 bar), or continuous with synthetic oils.

    Air Tank Module
    Design: Low profile vertical air receiver certified to ASME code

    Rating: 115 US gal. (435.3 liters) at 250 psi (17.2 bar)

    Welder Module

    Design: 4 welders of customer's choice, mounted in lockable box and vibration mounted, with sliding shelves for ease of servicing

  • Capacity: 12,000 lbs (5,443 kg) at 6 ft (1.83 m)

    Rating: 85,000 ft-lb (11.75 t-m)

    Length: 30 ft (9.14 m) fully extended

    Weight: 3,140 lb (1,379 kg)

    Chassis: Class 7 (29,000 GVWR)